Difference between revisions of "Xen"
From MohidWiki
(→Quick check on VM machines, and start them if needed) |
(→Quick check on VM machines, and start them if needed) |
||
| Line 15: | Line 15: | ||
VMMRTSRV06 4 1024 2 -b---- 6656.9 | VMMRTSRV06 4 1024 2 -b---- 6656.9 | ||
* The machines with the second state set to ''b'' are running for the amount of ''time'' indicated in seconds. | * The machines with the second state set to ''b'' are running for the amount of ''time'' indicated in seconds. | ||
| − | * The machines with the second state set to ''-'' aren't running. To start them | + | * The machines with the second state set to ''-'' aren't running. To start them using the following command for each machine: |
> sudo /usr/sbin/xm start VMMRTSRV0[2-6] | > sudo /usr/sbin/xm start VMMRTSRV0[2-6] | ||
Revision as of 10:32, 6 March 2009
Xen is an open-source virtual machine server to be run on Linux. At Maretec we recently took a course on Xen and have installed a quad-core Opteron machine with 20GB RAM and a nearly 2TB RAID 5 storage volume.
Contents
Maretec xen admin quick start
Quick check on VM machines, and start them if needed
- Download putty,
- Connect, using putty, to host 192.168.20.125 on port 22 as user maretec; use the admin password.
- Once in, perform the following command to check which machines are running and which are down:
> sudo /usr/sbin/xm list Name ID Mem VCPUs State Time(s) Domain-0 0 2048 2 r----- 20156.6 VMMRTSRV02 2 1024 2 -b---- 75002.4 VMMRTSRV04 3 1024 2 -b---- 3830.1 VMMRTSRV05 6 1024 2 -b---- 2433.5 VMMRTSRV06 4 1024 2 -b---- 6656.9
- The machines with the second state set to b are running for the amount of time indicated in seconds.
- The machines with the second state set to - aren't running. To start them using the following command for each machine:
> sudo /usr/sbin/xm start VMMRTSRV0[2-6]
Useful stuff to know
- How to start a VM?
- > sudo /usr/sbin/xm start VMMRTSRV0[2-6]
- How to reboot a VM?
- > sudo /usr/sbin/xm reboot VMMRTSRV0[2-6]
- How to shutdown a VM?
- > sudo /usr/sbin/xm shutdown VMMRTSRV0[2-6]
- How do I know which sudo commands are available to me?
- > sudo -l
- How do I know which commands are available with xm?
- > sudo /usr/sbin/xm list
Maretec Xen server machine
Hardware
- Quad-core Opteron AMD with 20GB ram and 2 TB RAID5 Physical Volume composed by 4x750GB enterprise-graded hard-drives,
- Suse Enterprise Server v10.2 with Xen Hypervisor installed,
- Network address at 192.168.20.125.
- RAID 5 of 1.97TB with no hot-swap disk available.
- Bridging: eth2<->192.168.20.125; eth1<->DMZ; eth0<->LAN;
Maretec Xen domains
- VMMRTSRV0[4,5]
- a windows server 2003 web-pages server on the DMZ. Domain name is einstein.maretec.ist.utl.pt, IP is 192.168.21.10.
- VMMRTSRV0[4,5]
- a windows server 2003 database server on the LAN. Domain name is copernico.maretec.ist.utl.pt, IP is 192.168.20.10.
- VMMRTSRV06
- A dedicated OpenDAP/Thredds server on the DMZ. Domain name is opendap.mohid.com, IP is 192.168.21.20 and VNC console access is 192.168.20.125:3.
Accessing via VNC
- Install <goto>TightVNC client</goto>.
- Then access to 192.168.20.125:? to have console access. You need to determine which port(?) is allocated to the VM. You can test values ranging from [1-9], or you can check the xen_config directory in the 192.168.20.125 machine (access it with ssh or putty).
