Difference between revisions of "Xen"
From MohidWiki
Davidbrito (talk | contribs) (→Maretec Xen Domains TroubleShooting) |
Davidbrito (talk | contribs) (→Maretec Xen Domains TroubleShooting) |
||
| Line 50: | Line 50: | ||
#If the machine is acessed by VNC then try restart it in the console. | #If the machine is acessed by VNC then try restart it in the console. | ||
#If the machine can not be acessed by VNC or remote desktop the restart has to be on Xen server (linux) using putty with IP 192.168.20.125: | #If the machine can not be acessed by VNC or remote desktop the restart has to be on Xen server (linux) using putty with IP 192.168.20.125: | ||
| − | Do the Maretec login - user | + | Do the Maretec login - user ''''maretec'''', admin pass. |
> sudo /usr/sbin/xm list (to see machines) | > sudo /usr/sbin/xm list (to see machines) | ||
> sudo /usr/sbin/xm destroy VMMRTSRV... | > sudo /usr/sbin/xm destroy VMMRTSRV... | ||
| Line 60: | Line 60: | ||
====For the Machines except for OpenDap==== | ====For the Machines except for OpenDap==== | ||
| − | For all the machines restart the network ports only have to do this command once: | + | For all the machines restart the network ports only have to do this command once in Xen server (putty with 192.168.20.125, user ''''maretec'''', admin pass: |
| − | ''''Insert here Marcos command''' | + | |
| + | >''''Insert here Marcos command''' | ||
====For the OpenDap Machine==== | ====For the OpenDap Machine==== | ||
| − | OpenDap machine has feudora linux and somehow the network restart does not work with the above. | + | OpenDap machine has feudora linux and somehow the network restart does not work with the above solution. |
#Connect to OpenDap by VNC | #Connect to OpenDap by VNC | ||
Revision as of 18:13, 11 June 2010
Xen is an open-source virtual machine server to be run on Linux. At Maretec we recently took a course on Xen and have installed a quad-core Opteron machine with 20GB RAM and a nearly 2TB RAID 5 storage volume.
Contents
Maretec xen admin quick start
Quick check on VM machines, and start them if needed
- Download putty,
- Connect, using putty, to host 192.168.20.125 on port 22 as user maretec; use the admin password.
- Once in, perform the following command to check which machines are running and which are down:
> sudo /usr/sbin/xm list Name ID Mem VCPUs State Time(s) Domain-0 0 2048 2 r----- 20156.6 VMMRTSRV02 2 1024 2 -b---- 75002.4 VMMRTSRV04 3 1024 2 -b---- 3830.1 VMMRTSRV05 6 1024 2 -b---- 2433.5 VMMRTSRV06 4 1024 2 -b---- 6656.9
- The machines with the second state set to b are running for the amount of time indicated in seconds.
- The machines with the second state set to - aren't running. To start them using the following command for each machine:
> sudo /usr/sbin/xm start VMMRTSRV0[2-6]
Useful stuff to know
- How to start a VM?
- > sudo /usr/sbin/xm start VMMRTSRV0[2-6]
- How to reboot a VM?
- > sudo /usr/sbin/xm reboot VMMRTSRV0[2-6]
- How to shutdown a VM?
- > sudo /usr/sbin/xm shutdown VMMRTSRV0[2-6]
- How to list installed VMs?
- > sudo /usr/sbin/xm list
- How do I know which sudo commands are available to me?
- > sudo -l
- How do I know which commands are available with xm?
- > sudo /usr/sbin/xm -l
Maretec Xen server machine
Hardware
- Quad-core Opteron AMD with 20GB ram and 2 TB RAID5 Physical Volume composed by 4x750GB enterprise-graded hard-drives,
- Suse Enterprise Server v10.2 with Xen Hypervisor installed,
- Network address at 192.168.20.125.
- RAID 5 of 1.97TB with no hot-swap disk available.
- Bridging: eth2<->192.168.20.125; eth1<->DMZ; eth0<->LAN;
Maretec Xen domains
- VMMRTSRV07_EINSTEIN
- a windows server 2003 web-pages server on the DMZ. Domain name is einstein.maretec.ist.utl.pt, IP is 192.168.21.10 and VNC console access is 192.168.20.125:1.
- VMMRTSRV04
- a windows server 2003 database server on the LAN. Domain name is copernico.maretec.ist.utl.pt, IP is 192.168.20.10.
- VMMRTSRV06
- A dedicated OpenDAP/Thredds server on the DMZ. Domain name is opendap.mohid.com, IP is 192.168.21.20 and VNC console access is 192.168.20.125:2.
- VMMRTSRV08_FTP
- A dedicated FTP server on the DMZ. Domain name is ftpserver.maretec.ist.utl.pt, IP is 192.168.21.30 and VNC console access is 192.168.20.125:?.
Maretec Xen Domains TroubleShooting
A Virtual Machine is down or non responsive
Have to check the state and if not responding restart it in server.
- Check the state using VNC console access 192.168.20.125:? or remote desktop.
- If the machine is acessed by VNC then try restart it in the console.
- If the machine can not be acessed by VNC or remote desktop the restart has to be on Xen server (linux) using putty with IP 192.168.20.125:
Do the Maretec login - user 'maretec', admin pass. > sudo /usr/sbin/xm list (to see machines) > sudo /usr/sbin/xm destroy VMMRTSRV... > sudo /usr/sbin/xm start VMMRTSRV...
There was a power failure and the machine is started but is out of the network
In this case the machines can be accessed by VNC but can not be accessed by remote desktop, explorer or pinging (out of the network). The solution is to restart the network ports (as in repair in windows environment).
For the Machines except for OpenDap
For all the machines restart the network ports only have to do this command once in Xen server (putty with 192.168.20.125, user 'maretec', admin pass:
>'Insert here Marcos command
For the OpenDap Machine
OpenDap machine has feudora linux and somehow the network restart does not work with the above solution.
- Connect to OpenDap by VNC
- Select the user 'user' and the usual pass for the user.
- Choose Applications > System Tools > Terminal
- In Terminal:
> su Insert Administrator password > /sbin/service network restart
Accessing via VNC
- Install <goto>TightVNC client</goto>.
- Then access to 192.168.20.125:? to have console access. You need to determine which port(?) is allocated to the VM. You can test values ranging from [1-9], or you can check the xen_config directory in the 192.168.20.125 machine (access it with ssh or putty).
How do I know how much space do I have left free?
Suppose you want to create a new LV (Logical Volume) within the VG (Volume Group) "dados01". Then you want to check how much free PE (Physical Extent) you have. In the example below you can see that we had 1.26 TB allocated (non-free) PE and 720.38 GB free PE.
> sudo /sbin/vgdisplay dados01 --- Volume group --- VG Name dados01 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 37 VG Access read/write VG Status resizable MAX LV 0 Cur LV 18 Open LV 9 Max PV 0 Cur PV 1 Act PV 1 VG Size 1.97 TB PE Size 128.00 MB Total PE 16123 Alloc PE / Size 10360 / 1.26 TB Free PE / Size 5763 / 720.38 GB VG UUID Ng5URl-392K-nEvS-wn4k-D1KG-dmbb-QT1VHR
