Module Sediment
From MohidWiki
Main options
In order to consider Module Sediment in MOHID Water simulations, the following keyword must be activated in the Module Model input data file:
SEDIMENT : 1
Module Sediment input file (Sediment_x.dat):
IN_SEDIMENT : ..\General Data\Sediment_Column_Thickness.dat
OUTPUT_TIME : 0. 600. RESIDUAL : 0
TIME_SERIE : 1 TIME_SERIE_LOCATION : ..\General Data\TimeSerie.dat
CONTINUOUS : 0
BATHYMETRY_EVOLUTION : 1 MORPHOLOGICAL_FACTOR : 100.
BEDLOAD_METHOD : 1 BEDSLOPE : 1 GEOMETRY_EVOLUTION : 1 MIN_THICKNESS : 0.1 MAX_THICKNESS : 0.5
CONSOLIDATION : 1 CONSOLIDATION_RATE1 : 0.9 CONSOLIDATION_RATE2 : 0.002
MAX_DENSITY_COHESIVE : 650. MIN_DENSITY_COHESIVE : 150. PERMEABILITY_EFFECTIVE_STRESS_DENSITY : 220.
<begincohesive> NAME : cohesive sediment UNITS : % DESCRIPTION : cohesive sediment FILE_IN_TIME : NONE INITIALIZATION_METHOD : CONSTANT DEFAULTVALUE : 0. D50 : 4e-6 <begindrydensity> INITIALIZATION_METHOD : CONSTANT DEFAULTVALUE : 150. <enddrydensity> <endcohesive>
<beginsandclass> NAME : SAND_1 UNITS : % DESCRIPTION : SAND_1 DYNAMIC : 1 FILE_IN_TIME : NONE INITIALIZATION_METHOD : LAYERS LAYERS_VALUES : 0. 0. 1. 0. DEFAULTVALUE : 0. D50 : 0.2e-3 <endsandclass>
<beginsandclass> NAME : SAND_2 UNITS : % DESCRIPTION : SAND_2 DYNAMIC : 1 FILE_IN_TIME : NONE INITIALIZATION_METHOD : LAYERS LAYERS_VALUES : 0. 1. 0. 0. DEFAULTVALUE : 0. D50 : 0.4e-3 <endsandclass>
<beginsandclass> NAME : SAND_3 UNITS : % DESCRIPTION : SAND_3 DYNAMIC : 1 FILE_IN_TIME : NONE INITIALIZATION_METHOD : LAYERS LAYERS_VALUES : 1. 0. 0. 0. DEFAULTVALUE : 0. D50 : 0.6e-3 <endsandclass>
