Data file

This file contains the relevant information to run the MohidReservoirOptimization program. Like most of Mohid system's files, it is uses keywords, which are:

• START - initial time [AAAA MM DD HH MM SS];
• END - final time [AAAA MM DD HH MM SS];
• DT - time step in seconds;
• W2_BATH_FORMAT - determines if the bathymetry file is in free form or CQUAL-W2's format;
• W2_DATA_FORMAT - determines if the control file is in free form or CQUAL-W2's format;
• IMX - number of segments - only if W2_DATA_FORMAT is set to free;
• KMX - number of layers - only if W2_DATA_FORMAT is set to free;
• NWB - number of bathymetry files (must be 1) - only if W2_DATA_FORMAT is set to free;
• NBR - number of branches - only if W2_DATA_FORMAT is set to free;
• BE - only if W2_DATA_FORMAT is set to free;
• JBDN - only if W2_DATA_FORMAT is set to free;
• SLOPE - only if W2_DATA_FORMAT is set to free;
• ELBOT - only if W2_DATA_FORMAT is set to free;
• DHS - only if W2_DATA_FORMAT is set to free;
• UHS - only if W2_DATA_FORMAT is set to free;
• US - only if W2_DATA_FORMAT is set to free;
• DS - only if W2_DATA_FORMAT is set to free;
• BS - only if W2_DATA_FORMAT is set to free;
• UQB - only if W2_DATA_FORMAT is set to free;
• DQB - only if W2_DATA_FORMAT is set to free;
• RESERVOIR_ERROR - allowed error in %, between the final reservoir volume and the acomulated volumes file.

Sample data file:

---

START  : 2006 01 01 00 00 00
END  : 2006 01 01 00 01 00
DT  : 60
!Either "fixed" or "free"
W2_BATH_FORMAT  : free
!Either "fixed" or "free"
W2_DATA_FORMAT : fixed
IMX  : 25
KMX  : 30
NWB  : 1
NBR  : 1
BE  : 1
JBDN  : 1
SLOPE  : 0.0
ELBOT  : 0.0
DHS  : 0
UHS  : 0
US  : 2
DS  : 24
BS  : 1
UQB  : 1
DQB  : 1
!allowed error %
RESERVOIR_ERROR : 0.00025

---