Personal tools

Data file

From MohidWiki

Revision as of 10:27, 3 December 2008 by Guillaume (talk | contribs) (1 revision)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This file contains the relevant information to run the MohidReservoirOptimization program. Like most of Mohid system's files, it is uses keywords, which are:

  • START - initial time [AAAA MM DD HH MM SS];
  • END - final time [AAAA MM DD HH MM SS];
  • DT - time step in seconds;
  • W2_BATH_FORMAT - determines if the bathymetry file is in free form or CQUAL-W2's format;
  • W2_DATA_FORMAT - determines if the control file is in free form or CQUAL-W2's format;
  • IMX - number of segments - only if W2_DATA_FORMAT is set to free;
  • KMX - number of layers - only if W2_DATA_FORMAT is set to free;
  • NWB - number of bathymetry files (must be 1) - only if W2_DATA_FORMAT is set to free;
  • NBR - number of branches - only if W2_DATA_FORMAT is set to free;
  • BE - only if W2_DATA_FORMAT is set to free;
  • JBDN - only if W2_DATA_FORMAT is set to free;
  • SLOPE - only if W2_DATA_FORMAT is set to free;
  • ELBOT - only if W2_DATA_FORMAT is set to free;
  • DHS - only if W2_DATA_FORMAT is set to free;
  • UHS - only if W2_DATA_FORMAT is set to free;
  • US - only if W2_DATA_FORMAT is set to free;
  • DS - only if W2_DATA_FORMAT is set to free;
  • BS - only if W2_DATA_FORMAT is set to free;
  • UQB - only if W2_DATA_FORMAT is set to free;
  • DQB - only if W2_DATA_FORMAT is set to free;
  • RESERVOIR_ERROR - allowed error in %, between the final reservoir volume and the acomulated volumes file.


Sample data file:


START  : 2006 01 01 00 00 00
END  : 2006 01 01 00 01 00
DT  : 60
!Either "fixed" or "free"
W2_BATH_FORMAT  : free
!Either "fixed" or "free"
W2_DATA_FORMAT : fixed
IMX  : 25
KMX  : 30
NWB  : 1
NBR  : 1
BE  : 1
JBDN  : 1
SLOPE  : 0.0
ELBOT  : 0.0
DHS  : 0
UHS  : 0
US  : 2
DS  : 24
BS  : 1
UQB  : 1
DQB  : 1
!allowed error %
RESERVOIR_ERROR : 0.00025