Difference between revisions of "Run SWAT Model"

Revision as of 16:33, 17 September 2009

Create the SWAT Project

Run ArcView

If a Window appears "Welcome to ArcView GIS" asking to create a new view, click "Cancel"

Go to menu "File"->"Extensions"

Click on the check box "AVSWATX extendable" and NEVER click the check box "Make Default"

ArcView SWAT extension

Go to Explorer and create a directory for the project (e.g. Aplica\AVSWAT2005\Portugal\Guadiana\BaciaExemplo\CenarioX)

A new Window appears - SWAT interface. Click on the box "New Project" to create a new project.

Choose the name for the project in the directory you created (e.g. Bacia_crsr)

Go back to Explorer and to your project directory (the just created by the project) and copy the "data" file from \\datacenter 'FILL THIS

A window appears "SWAT - ArcView: DataSets". Choose the data directory just created and named "data".

Create the project options text file

Copy from \\datacenter 'FILL THIS the text file where you will write all the options that you make in this interface. This file is not used by the model, it is only a memo and will be very useful when you have a lot of old simulations and have to understand what options have you chosen and difference betwen them.

Place the file in the ..\watershed\text folder that meanwhile was created by SWAT.

Watershed Delineation

A window appears "Watershed delineation".

ArcView SWAT watershed delineation

In Dem Setup

Remind to write down relevant information to your memo file. Follow the example file that you copied previously

Click the folder icon to open the DEM (digital elevation model), choose to open from disk and select the DEM in the folder data\dem.

If you do not have yet the DEM go to FILL THIS

Click Properties button

Click Projection button

Message "Undefined Projection". Click "OK"

Message "Do you want to modify your projection?". Click "YES"

Click "Custom Projection" button

"Projection Properties" window. Select radio buttom "Custom"

On "Projection" choose "Transverse Mercator"

On "Spheroid" choose "Internation 1909"

Write the coordinate settings in the next picture so that the final it should look like this:

ArcView SWAT projection

Click "OK" twice.

Back to "Dem Setup" click "Apply" button

Message "Do you want the edge cells to flow inside?" Choose "No"

Message "End of processing". Click "OK"

In Stream Definition

Choose the treshold area for the consideration of a stream line. Remind to write it down in your memo file

Click "Apply"

When the process is finished, streams will show up in the background

Outlet and Inlet Definition

Outlets are places where the model will produce outputs (flow, concentrations), so you should have an outlet in the reservoir wall and in the river monitoring points from INAG (to validate model results)

If there is not already an outlet where you whish to have one, add the outlets leaving the radio button on "Outlet" and clicking on "Add". Choose where to add the point. Hint: Use the reservoir shape to know where to locate the downstream watershed outlet (at the reservoir wall so that all drainage area is considered).

After adding all needed outlets, select the outlet which is the watershed outlet (downstream outlet), clicking first on "Select button" and then pointing at the outlet (or selecting an area where that is the only outlet inside).

Click "yes" to confirm that you selected one outlet.

The model generates the watershed and subbasins, then click "Apply" so the model computes the parameters for each subbasin generated.

Message window saying that the computation was completed. Click "OK"

Land Use and Soil Definition