W2 con sample
From MohidWiki
This is the list of known keywords that need to be changed based on the Beliche ( \\Datacenter\Albufeiras_Eutrofizacao\ComoFazer\2.CorreCe-Qual\ExemploFeito_Beliche\1.SimulacaoZero\AdaptedToW2con) runs.
Useful recommendations
- Use the Cin_br1.npt, Tin_br1.npt and Qin_br1.npt files from the Beliche run and replicate them for every branch.
- Use the shd.npt and wsc.npt files generated by the w2i geometry software.
- Then, edit the wsc.npt file and alter the ending date to 1000. (days).
- Alter the w2_con.npt from the Beliche run accordingly to your watershed geometry.
Sample file
Check out to leave only one blank line between the last of your branches and the next parameter line. That can cause the model to crash.
- lines 15,16 - change the values from Beliche with the ones generated by the w2i geometry software.
GRID NWB NBR IMX KMX
1 3 23 42
- lines 45-48 - change the values from Beliche with the ones generated by the w2i geometry software except for the NLMIN which we maintain to the value of ONE (1).
BRANCH G US DS UHS DHS UQB DQB NLMIN SLOPE BR1 2 11 0 0 0 0 1 0.00000 BR2 14 18 0 11 0 0 1 0.00000 BR3 21 22 0 18 0 0 1 0.00000
- lines 50-51 - change the values from Beliche with the ones generated by the w2i geometry software. Keep the JBDN equal to 1 (or the branch number where the dam-wall lies).
LOCATION LAT LONG EBOT BS BE JBDN WB 1 38.2000 -7.000 12.0000 1 3 1
- lines 62-65 (One line per branch that you have) AND QINIC OFF disconnect flow interpolation for branches inflow files
INTERPOL QINIC DTRIC HDIC BR1 OFF OFF OFF BR2 OFF OFF OFF BR3 OFF OFF OFF
- lines 82-115 (One line per branch that you have and number of structures equal ZERO (0))
N STRUC NSTR BR1 0 BR2 0 Br3 0
(One line per branch that you have)
STR INT STRIC STRIC STRIC STRIC STRIC STRIC STRIC STRIC STRIC BR 1 Br 2 Br 3
(One line per branch that you have)
STR TOP KTSTR KTSTR KTSTR KTSTR KTSTR KTSTR KTSTR KTSTR KTSTR BR1 Br2 Br3
(One line per branch that you have)
STR BOT KBSTR KBSTR KBSTR KBSTR KBSTR KBSTR KBSTR KBSTR KBSTR BR1 BR2 Br3 STR SINK SINKC SINKC SINKC SINKC SINKC SINKC SINKC SINKC SINKC BR1 BR2 Br3
(One line per branch that you have)
STR ELEV ESTR ESTR ESTR ESTR ESTR ESTR ESTR ESTR ESTR BR1 Br2 Br3
(One line per branch that you have)
STR WIDT WSTR WSTR WSTR WSTR WSTR WSTR WSTR WSTR WSTR BR1 0.00000 BR2 Br3
- lines 220-223 (One line per branch that you have)
DST TRIB DTRC DTRC DTRC DTRC DTRC DTRC DTRC DTRC DTRC BR 1 OFF Br 2 OFF Br 3 OFF
- lines 756-759 (value must be 0.2 and the number of values must be equal to segment number - add or delete according to your geometry)
S DEMAND SOD SOD SOD SOD SOD SOD SOD SOD SOD
0.20000 0.20000 0.20000 0.20000 0.20000 0.20000 0.20000 0.20000 0.20000
0.20000 0.20000 0.20000 0.20000 0.20000 0.20000 0.20000 0.20000 0.20000
0.20000 0.20000 0.20000 0.20000 0.20000
(Check file name)
BTH FILE..................................BTHFN................................. WB 1 Bth_wb1.npt
(Check file name)
MET FILE..................................METFN................................. WB 1 Met_Alentejo.npt
- lines 797-815 (One line per branch that you have - if used, check if names are what you have)
QIN FILE..................................QINFN................................. BR1 Qin_Br1.npt BR2 Qin_Br2.npt BR3 Qin_Br3.npt
(One line per branch that you have - if used, check if names are what you have)
TIN FILE..................................TINFN................................. BR1 Tin_Br1.npt BR2 Tin_Br2.npt BR3 Tin_Br3.npt
((One line per branch that you have - if used, check if names are what you have)
CIN FILE..................................CINFN................................. BR1 Cin_Br1.npt BR2 Cin_Br2.npt BR3 Cin_Br3.npt
(One line per branch that you have - if used, check if names are what you have)
QOT FILE..................................QOTFN................................. BR1 Qout_Beliche.npt BR2 Br3
- lines 826-884 (One line per branch that you have - if used, check if names are what you have)
QDT FILE..................................QDTFN................................. BR1 qdt_br1.npt - not used BR2 qdt_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
TDT FILE..................................TDTFN................................. BR1 tdt_br1.npt - not used BR2 tdt_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
CDT FILE..................................CDTFN................................. BR1 cdt_br1.npt - not used BR2 cdt_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
PRE FILE..................................PREFN................................. BR1 pre_br1.npt - not used BR2 pre_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
TPR FILE..................................TPRFN................................. BR1 tpr_br1.npt - not used BR2 tpr_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
CPR FILE..................................CPRFN................................. BR1 cpr_br1.npt - not used BR2 cpr_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
EUH FILE..................................EUHFN................................. BR1 euh_br1.npt - not used BR2 euh_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
TUH FILE..................................TUHFN................................. BR1 tuh_br1.npt - not used BR2 tuh_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
CUH FILE..................................CUHFN................................. BR1 cuh_br1.npt - not used BR2 cuh_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
EDH FILE..................................EDHFN................................. BR1 edh_br1.npt - not used BR2 edh_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
TDH FILE..................................TDHFN................................. BR1 tdh_br1.npt - not used BR2 tdh_br2.npt br3
(One line per branch that you have - if used, check if names are what you have)
CDH FILE..................................CDHFN................................. BR1 cdh_br1.npt - not used BR2 cdh_br2.npt br3
